Equipment Description
This machine realizes truly automatic on polishing, cold welding, and whole winding process control. By the way of memorizing the first welding position, it can set parking when winds same coils so that implements to control winding process automatically. According to different foil materials and sizes of connection lines, it also can set feeding schedule about compaction power and pressure cylinder, and have the function of memory set. At the back of cold welding unit, there is a foil grinding unit to polish lower surface of welding point. After that, the metal cutting produced by polishing will be collected and cleaned by take-up reel and cleaner.
Main Technical Parameter
NO. |
Item |
Specification Parameter |
1 |
Axial Length |
300mm |
2 |
Foil Thickness |
Copper/Aluminum Foil:0.2-2.5mm |
3 |
Coil Outer Diameter(Without connection line) |
Φ700 |
4 |
Cylinder Expansion Range |
φ400-φ520 |
5 |
Coil Form |
Round/Rectangle/Oval |
6 |
Winding Speed |
0-35r/min |
7 |
Speed Regulation Way |
Parameter Setting |
8 |
Winding Power |
5.5KW (Servo motor) |
9 |
Welding Way |
Cold Welding |
10 |
Welding Press |
200KN |
11 |
Connection line Positioning Device |
1 Set |
12 |
Electric Polish Device |
1 Set |
13 |
Cold Welding Crimping Mould |
According to customers’product (6pcs) |
14 |
Rectify Deviation Way |
Photoelectric Sensing Automatic Rectify Deviation |
15 |
Rectify Deviation Precision |
±0.5 mm |